PE-KAYO Series specially designed for the Oil&Gas stations as it has multiple functions. The detector has a special accelerometer chip inside to monitor physical bumps happening on the location where the device installed along with gas measurement functions. It can generate an alarm to cut the gas and oil flow if a car or truck hits the detector or the mounted shaft.

Moreover, the Catalytic sensor employed PE-Kayo shows excellent output in 0-100%LEL range.

Ask the Expert

• Sensor: Uses high-quality catalytic sensor specially designed to detect LPG, Methane, Petrol Vapour, Butane, Propane, and Hydrogen gases in 0-100%LEL.
• Certification: ATEX and IECEx certified PE Series ready to use in explosive atmosphere safely
• Connection: Provides universal standard 4-20mA analog output
• Entry: 1 x 1/2″ NPT cable entries
• Body: Aluminium die-cast body and sensor head superb performance under harsh environmental conditions with IP65 protection class.
• Remote Control: Detector status can be monitored Prosense Gas Monitoring software remotely.
• Relay Contacts: P-3R+ relay module integrated PE Series detectors can manage other equipments or link to firefighting panels.

Sensor Technology Catalytic, Motion Sensor: 3 axis (3D accelerometer)
Output Signal 4-20mA and Modbus RS485
Sensor Warm-Up 60sec
Response Time(T90) <15sec
Accuracy %1
Operating Temperature ‐40°C ~ +70°C
Humidity 5 ~ 95%RH Non-Condensing
Input Min 10VDC - Max 32VDC - Nominal 24VDC
Power Consumption Max.4W
Relay Outputs 2 Alarms (Selectable) and 1 Fault
Cable Entry 1/2"NPT
IP Rating IP65
Junction Box Epoxy Painted Die?Cast Aluminium
Sensor Head Nickel-Plated Brass
Dimensions/Weight 172,5x118,15x88mm / 1150gr
ATEX Marking II 2G Ex db IIC T5 Gb
Hazardous Class Zone 1 - Zone 2
Certificates IMQ 19 ATEX 045 X
IECEx IMQ 18.0009X
Standards IEC EN 60079-0
IEC EN 60079-1
  1. PE-Kayo Series Datasheet

    PE-Kayo Series Datasheet

  2. PE Kayo User Manual

    PE Kayo User Manual

  3. CE Conformity

    CE Conformity

  4. UKCA Conformity

    UKCA Conformity

P-3R+ Provides 2xAlarms, 1xFault Relay Contacts P-3R+
PK-KEP Calibration Cap PK-KEP
SP-PEK-ST02-HC HC LEL Catalytic Sensor Head SP-PEK-ST02-HC
SP-SH10-SIN Sinter Set(10pcs) for SH Sensor Head SP-SH10-SIN
SP-PEK-GB PEK Series Enclosure (Excluding Lid) SP-PEK-GB
SP-PEK-TB02 02 PEK Series Transmitter SP-PEK-TB02